Master High-Density ASIC Hardware & Dielectric Immersion
We train Australian operators, rural property owners, and electrical tradespeople to engineer, maintain, and thermally optimize continuous high-draw crypto mining installations safely under regional climate conditions.
40kW Active Test Bench
Operating single-phase dielectric fluid tanks with live Bitmain and MicroBT hardware.
Specialized Hardware & Advisory Tracks
From component-level micro-soldering to rural grid feasibility audits, our educational offerings are built on physical electrical engineering.
ASIC Diagnostic & Component-Level Repair Masterclass
Master oscilloscope waveform tracing, faulty ASIC chip isolation, LDO voltage regulator replacement, and hot-air SMD rework on commercial hashboards.
Rural Microgrid & Solar Curtailment Mining Feasibility Audit
On-site engineering assessment of your rural property, agricultural switchboard, and solar/hydro generation profile to model profitable off-grid and curtailment mining.
ASIC Firmware Tuning & Low-Noise Acoustic Baffling Clinic
Learn custom frequency-voltage autotuning profiles (Braiins OS, Vnish, LuxOS) to maximize joules-per-terahash efficiency, plus design acoustic silencer plenums.
Verified Participant Experiences
Practical outcomes from electricians, agricultural solar operators, and facility managers trained in our Cowwarr lab.
“We had 85kW of rooftop solar on our packing shed that AusNet capped to 5kW export. Attending the 2-day immersion workshop in Cowwarr gave me the exact electrical schematics to build an automated 40kW immersion tank using dielectric fluid. Sizing the brazed plate heat exchanger for our 40°C February days was the key insight. The course is very dense—there is a lot of electrical math packed into Day 1 which felt rushed before lunch, but having the physical test tank running in front of us made the concepts stick.”
“I have been wiring three-phase switchboards for 15 years, but troubleshooting domain voltage faults on Antminer hashboards was a different discipline. Lachlan's microscope bench setup and oscilloscope signal tracing guide showed me how to pinpoint failing LDO voltage regulators in under ten minutes. We recovered four dead boards on our very first practice run.”
Technical Field Notes
In-depth guides on thermodynamics, Australian electrical standards, and hardware diagnostics.
Taming Latrobe Valley Summers: Airflow Static Pressure vs Single-Phase Dielectric Immersion
When ambient air temperatures in regional Victoria exceed 38°C, conventional air-cooled ASIC miners face severe thermal throttling. Here is our thermodynamic breakdown comparing forced-air negative pressure plenums against closed-loop dielectric immersion tanks.
Read Guide →
Calculating 415V Three-Phase Neutral Current and Harmonic Distortion with Dense Mining Loads
Switch-mode power supplies in modern ASIC hardware introduce significant 3rd and 9th order harmonic currents. Here is how to calculate neutral conductor sizing and avoid transformer overheating in 415V installations.
Read Guide →
ASIC Hashboard Troubleshooting: Diagnosing LDO Regulators and Boost Circuits with an Oscilloscope
A step-by-step bench guide to troubleshooting 0-hash boards. Tracing the 1.8V and 0.8V domain rails, verifying the 25MHz crystal oscillator clock signal, and identifying dead ASIC chips in a serial chain.
Read Guide →