Technical Guides & Bench Analysis
Deep-dive articles written by our power systems engineers and bench technicians covering thermodynamics, electrical safety standards, component soldering, and microgrid design.
Taming Latrobe Valley Summers: Airflow Static Pressure vs Single-Phase Dielectric Immersion
When ambient air temperatures in regional Victoria exceed 38°C, conventional air-cooled ASIC miners face severe thermal throttling. Here is our thermodynamic breakdown comparing forced-air negative pressure plenums against closed-loop dielectric immersion tanks.
Calculating 415V Three-Phase Neutral Current and Harmonic Distortion with Dense Mining Loads
Switch-mode power supplies in modern ASIC hardware introduce significant 3rd and 9th order harmonic currents. Here is how to calculate neutral conductor sizing and avoid transformer overheating in 415V installations.
ASIC Hashboard Troubleshooting: Diagnosing LDO Regulators and Boost Circuits with an Oscilloscope
A step-by-step bench guide to troubleshooting 0-hash boards. Tracing the 1.8V and 0.8V domain rails, verifying the 25MHz crystal oscillator clock signal, and identifying dead ASIC chips in a serial chain.
Pairing Solar Curtailment with Dynamic Hashrate Scaling on Regional Victorian Properties
Many commercial solar installations across rural Victoria face strict 0kW or 5kW grid export limits imposed by distribution networks. Here is how behind-the-meter compute converts curtailed solar energy into direct revenue.
Looking for Specific Electrical or Thermal Guidance?
We welcome technical inquiries regarding transformer loading, Australian standard AS/NZS 3000 compliance, and immersion fluid selection.
Submit a Technical Question →